Parvalux UK Parvalux Germany Parvalux France Spain Parvalux Poland Czech Republic Austria China
  about us  | news | products | services | applications | on-line store | contact
spacer spacer spacer


services
FAQs
CAD Library
Downloads
Request Information
Make An Enquiry
spacer
spacer spacer spacer

DC Permanent Magnet - PM10LIS
Datatables
EMC installation guidelines
Geared motor thermal rating guide
Make An Enquiry
pm10lis
PM10LIS - Front Aspect spacer PM10LIS - Side Aspect
Motor & Gearbox Specification
Voltage : DC
Motor Type : Permanent Magnet
Gear Type : Inline Large Multi Spur
Speed Range : 4 - 500 r.p.m
Output : 20 - 55 watts
 
Optional Extras
Double ended motor spindles.
Double ended gear shafts, (not available on in-line gearboxes).
Non standard shafts (stainless steel, keyways, flats, etc).
Terminal box (one position only, on top). PM1 - 6 / PM50/60
Holes tapped for spigot mounting
3 core cable on request (class "B").
Electro-Magnetic Brake (Available as PDF) : click here
Thyristor D.C. Controller: : Contact us on +44 (0)1202 512575
Tachogenerator (Available as PDF) : click here
Additional Extras for Geared Units: Non standard catalogue reductions available on request
Bronze Gears (Single and Double reduction final gears)
Flange Mounting Gearbox Details : click here
Gearbox Shaft Positions : click here
Motor & Gearbox Construction Details
Voltage Range: 12v, 24v, 50v, 110v or 200v, D.C. Other voltages quoted for on request.
Speeds: Versions PM1 - 6, as an optional extra, can be supplied 2 speed with or without self parking as a geared unit.
Starting Current: Approximately 3 times full load.
Rotation: Reversible two leads as standard.
Construction: Motors – Shielded ball bearings spring loaded for quiet running.
Single Reduction Gearboxes: Fitted with ball bearings, alloy gearbox with composite gear, grease lubricated for life and suitable for mounting in any position.
In-Line Double Reduction Gearboxes: Fitted with ball bearings, alloy gearbox with composite gear wheel, grease lubricated for life and suitable for mounting in any position.
Spur Reduction Gearboxes: Fitted with ball bearings, alloy gearbox with composite pinion gear and multi-spur type hardened steel gears, grease lubricated for life. Suitable for mounting in any position.
Connections: 30cm P.V.C. flexible (Terminal box on request). Not applicable to PM7/8/9 PM10/PM11.
Insulation: Class ‘F’ (maximum temperature rise 115°C at a maximum ambient of 40°C).
Specifications: B.S. 5000 part 11. (I.E.C. 72). (CSA C-US if required).