|
 |
PRODUCTS > PM5
 |
|
|
|
DC Permanent Magnet - PM5
|
|
|
|
|
|
|
|
|
|
|
|
|
|
 |
 |
| Motor Specification |
| Voltage : DC |
| Motor Type : Permanent Magnet |
| Speed Range : 1500 - 5000 r.p.m |
| Output : 50 - 300 watts |
| Weight: 2.65 Kg
|
| |
|
| Optional Extras |
| Eurostandard flange & shaft (Available as PDF) : click here |
| NEMA flange & shaft (Available as PDF) : click here |
| IEC flange & shaft B14 (M56) (Available as PDF) : click here |
| Double ended motor spindles. |
| Non standard shafts (stainless steel, keyways, flats, etc). |
| Terminal box (one position only, on top). PM1 - 6 / PM50/60 |
| Holes tapped for spigot mounting |
| 3 core cable on request (class "B"). |
| Electro-Magnetic Brake (Available as PDF) : click here |
| Thyristor D.C. Controller: : Contact us on +44 (0)1202 512575 |
| Tachogenerator (Available as PDF) : click here |
|
| Motor Construction Details |
| Voltage Range: 12v, 24v, 50v, 110v or 200v, D.C. Other voltages quoted for on request.
|
| Speeds: Versions PM1 - 6, as an optional extra, can be supplied 2 speed with or without self parking as a geared unit. |
| Starting Current: Approximately 3 times full load. |
| Rotation: Reversible two leads as standard. |
| Construction: Motors – Shielded ball bearings spring loaded for quiet
running. |
| Connections: 30cm P.V.C. flexible (Terminal box on request). Not applicable to PM7/8/9 PM10/PM11. |
| Insulation: Class ‘F’ (maximum temperature rise 115°C at a maximum
ambient of 40°C). |
| Specifications: B.S. 5000 part 11. (I.E.C. 72). (CSA C-US if required). |
|
|
|
 |
|
|
|
DC Brushless
 "PM5 - Front Aspect")
 "PM5 - Side Aspect")
