Parvalux UK Parvalux Germany Parvalux France Spain Parvalux Poland Czech Republic Austria China
  about us  | news | products | services | applications | on-line store | contact
spacer spacer spacer


services
FAQs
CAD Library
Downloads
Request Information
Make An Enquiry
spacer
spacer spacer spacer

AC Induction - SD13LWS
Datatables
Geared motor thermal rating guide
Make An Enquiry
sd13lws
SD13LWS - Front Aspect spacer SD13LWS - Side Aspect
Motor & Gearbox Specification
Voltage : AC
Motor Type : Induction
Gear Type : Worm & Wheel Pinion Large Multi Spur
Speed Range : 0.22 - 90 r.p.m
Output : 100 - 190 watts
 
Optional Extras
Double ended motor spindles.
Double ended gear shafts, (not available on in-line units).
Non standard shafts (stainless steel, keyways, flats, etc).
Terminal box
Totally enclosed frame half hour rating.
Enclosure IP 65 on request.
Electro-Magnetic Brake (Available as PDF) : click here
Tachogenerator (Available as PDF) : click here
Additional Extras for Geared Units: Non standard catalogue reductions available on request
Bronze Gears (Single and Double reduction final gears)
Flange Mounting Gearbox Details : click here
Gearbox Shaft Positions : click here
Motor & Gearbox Construction Details
Voltage Range: 100/120v - 220/240v A.C. single phase, 50Hz. 380/440 A.C. three phase, 50Hz. Special voltages and frequencies quoted on request.
Motor Type: Single phase with separate capacitor or three phase induction, suitable for reversing. Shaded pole (not reversible) anti-clockwise rotation as standard.
Starting Currents: Capacitor or three phase induction: approx 2.5 times full load.
Shaded pole: approx 2 times full load.
Construction: Motors – Shielded ball bearings spring loaded for quiet running.
Single Reduction Gearboxes: Fitted with ball bearings, alloy gearbox with composite gear wheel, grease lubricated for life and suitable for mounting in any position.
In-Line Double Reduction Gearboxes: Fitted with ball bearings, alloy gearbox with composite gear wheel, grease lubricated for life and suitable for mounting in any position.
Spur Reduction Gearboxes:Fitted with ball bearings, alloy gearbox with composite pinion wheel and multi-spur type hardened steel gears, grease lubricated for life. Suitable for mounting in any position.
Connections: 30cm P.V.C. flexible (SD 38 and SD 29 terminal box).
Insulation: Class ‘F’ (maximum temperature rise 115°C at a maximum ambient of 40°C).
Specifications:B.S. 5000 part 11. (I.E.C. 72). (CSA C-US if required).